Rogers County has plenty of land, and that means plenty of pole barns: hay and equipment barns, horse barns, hobby shops and garages behind homes from Oologah to Inola. Most were built with bare metal or a thin blanket of insulation, so they bake in summer, freeze in winter and drip with condensation on cool mornings.
Closed-cell spray foam solves all three. It bonds to the metal skin and purlins, seals the panel laps and fastener holes, and keeps the steel warm enough that water stops forming. It also stiffens thin panels, cuts down on wind and rain noise, and leaves fewer gaps and soft spots for mice and birds to move into.
The right amount of foam depends on how you use the barn. We size each job to the building and your plans, and your free estimate shows both a basic condensation coat and a fully insulated option.
Claremore tip
If you plan to heat or cool the barn later, insulate the roof more heavily now. Adding foam after equipment and shelving are in place costs more.
Signs Your Pole Barn Needs Spray Foam
- ✓Water dripping from the roof on cool mornings
- ✓Rust on tools, vehicles, purlins or fasteners
- ✓A shop too hot to work in by early afternoon
- ✓Blanket insulation that is torn or full of nests
- ✓Plans to add a heater or mini split
- ✓Wind and dust coming through panel seams
Condensation Coat or Fully Insulated Shop?
A condensation coat of about 1 inch of closed-cell foam is the most affordable way to stop sweating in a barn that is not heated or cooled. It protects hay, feed, tools and equipment from moisture.
For a heated or air-conditioned shop, 1.5 to 3 inches of closed-cell foam gives roughly R-10 to R-20. Some owners put 2 to 3 inches on the roof and less on the walls to balance cost. We price both options side by side.
Pole Barn Spray Foam Insulation Services We Offer
✓Condensation Coat
A thin closed-cell layer that stops roof and wall sweating.
✓Workshop Insulation
Thicker foam for heated and cooled shops.
✓Horse and Hay Barns
Moisture control with attention to ventilation for animals.
✓Door and Eave Sealing
Closing gaps at doors, eaves and panel laps.
✓Blanket Removal
Removing torn fiberglass blankets before foam.
Pole Barn Spray Foam Insulation Cost in Claremore, OK
| Project | Typical Range | What Affects It |
|---|---|---|
| 30x40 barn, about 2 in closed-cell, walls and roof | $5,500–$11,000 | Wall height, doors, roof pitch |
| 40x60 barn, about 2 in closed-cell, walls and roof | $10,000–$20,000 | Size and openings |
| Condensation coat, about 1 in | $1.00–$2.00 per sq ft | Surface area |
| Old blanket removal | Quoted per project | Condition and access |
Planning ranges. Your free estimate measures your barn's walls and roof.
How It Works
- 1
Visit
We look at how you use the barn and measure it.
- 2
Prep
Equipment is moved or covered and surfaces are cleaned.
- 3
Spray
Closed-cell foam is applied to roof and walls in passes.
- 4
Walkthrough
We check coverage and talk through doors and ventilation.